UNLOADING AND ASSEMBLY
Form 169007
16
Revision
D
f. Secure cylinder to endsheet and reel arm with
pins as shown. Note orientation of pins. Secure
with cotter pins.
g. Remove sling, and re-position around reel tube
near reel center support arm. (DOUBLE REEL
ONLY).
h. Lift reel so that reel center lift cylinder mounting
holes line up with bracket on frame. (DOUBLE
REEL ONLY).
i.
Remove shipping wire/banding from cylinder, and
remove pin from frame. (DOUBLE REEL ONLY).
j. Attach cylinder to frame with pin as shown.
Secure with cotter pin. (DOUBLE REEL ONLY).
k. Remove sling, and re-position around reel tube
near opposite outboard reel arm.
l.
Remove shipping wire/banding from cylinder, and
remove pins from lug and arm.
m. Lift reel so that reel lift cylinder mounting holes line
up with lug on endsheet and hole in reel arm.
n. Secure cylinder to endsheet and reel arm with
pins as shown. Note orientation of pins. Secure
with cotter pins.
o. Remove shipping wire from center arm hose
bundle, and remove bolt and nut from hose clip.
(DOUBLE REEL ONLY).
(continued next page)
CENTER CYLINDER - DOUBLE REEL
DOUBLE REEL