UNLOADING AND ASSEMBLY
Form 169007
27
Revision
D
STEP 10. INSTALL REEL
ENDSHIELDS
Up to three endshields on each end of some reels
were removed for shipping purposes.
If necessary, re-install shields as follows.
a. Manually rotate reel until the wired endshields are
accessible. Remove endshields.
b. Manually rotate reel for accessibility to re-install
the shields.
c. Loosen bolts securing endshield supports to disc,
and rotate supports approximately as shown.
d. Retrieve hardware from bag removed in previous
step.
e. Install endshields with lip in relation to reel
rotation. Use 3/8 in. x 0.5 long TORX head
screws, and torque to 20 ft·lbf (27 N·m).
See
pictures above for hardware orientation.
The
jam-nuts must be locking jam-nuts. If they are not
locking nuts, use Loctite® #243 (or equivalent).
f.
Re-tighten endshield support bolts, if necessary.
TAIL END
DIRECTION
OF
ROTATION
CAM END
DIRECTION
OF
ROTATION
