UNLOADING AND ASSEMBLY
Form 169007
18
Revision
D
STEP 5.
ATTACH TO
WINDROWER
IMPORTANT
To prevent damage to the lift system
when lowering header lift linkages
without a header or weight box
attached to windrower, ensure that float
engagement pin is installed in storage
location (A), and not installed at hole
location (B).
a. If not installed, attach draper header boots
(supplied with header) to windrower lift linkage as
follows:
DANGER
Stop engine, and remove key from ignition
before leaving Operator's seat for any reason.
A child or even a pet could engage an idling
machine.
1. Remove pin (C) from boot (D).
2. Locate boot (D) on lift linkage (E), and re-
install pin (C). Pin may be installed from
either side of boot.
3. Secure pin (C) with hairpin.
4. Repeat for opposite lift linkage.
b. Remove hairpin on pins (F), and remove pins from
header legs.
(continued next page)
B
A
C
D
D
E
C
F