UNLOADING AND ASSEMBLY
Form 169007
29
Revision
D
B. D50
a. Remove bolt (A), and washer securing crop
divider to endsheet.
b. Lift divider to disengage lugs (B) at lower end.
c. Position crop divider as shown by locating lugs (B)
in holes in endsheet forward end, and lift forward
end of divider to face of endsheet.
d. Install bolt (A), lock-washer, and flat washer.
Tighten bolt.
e. Check that divider does
not
move laterally. Adjust
bolts (C) as required to tighten divider and remove
lateral play when pulling at divider tip.
f. Remove divider rods from shipping location on
header endsheet.
g. Position divider rod (D) on tip of crop divider as
shown, and tighten bolt (E).
h. Repeat above steps for other end of header.
D
E
B
B
A
A
B
C