UNLOADING AND ASSEMBLY
Form 169007
25
Revision
D
B. D50
CAUTION
The reel hydraulic cylinders must be
connected to the reel prior to removing the
stops. Failure to do so may result in the reel
sliding full forward when the stops are
removed.
CAUTION
Be sure all bystanders are clear of machine
before starting engine or engaging any header
drives.
a. Remove shipping wire and pins from reel fore-aft
cylinders on reel arms. Pin may be installed in
arm.
b. Start windrower, and level the reel arms with the
windrower hydraulics.
c. Extend and retract cylinders to re-phase cylinders.
d. Align cylinders with reel arm mounting holes with
windrower hydraulics. Stop engine, and remove
key.
e. Attach cylinders to reel arms with clevis pins,
washers, and cotter pins.
CAUTION
Reel arms must be level prior to removing the
stops. Failure to do so may result in reel
moving suddenly.
f.
Remove stops (bolts) from support arms.
LH ARM
RH ARM
LH ARM
RH ARM
