MS-TestPro
User’s Manual
Page 23 of 113
The basic analysis page displays the following information:
◼
General Link Quality.
Red, yellow, green as defined below.
◼
Transmitter Link Quality.
Red, yellow, green as defined below.
◼
Receiver Link Quality.
Red, yellow, green as defined below.
◼
Green
. The link is functional.
◼
Yellow
. The link is unstable.
◼
Red
. The link is faulty with a high probability of failure.
◼
Pixel Clock.
The clock frequency of the video transmission. The Pixel Clock values in the
receiver and transmitter screens should be similar.
◼
Chip Type.
The chip model/part number.
◼
Cable Length.
Approximate cable length calculation (accuracy level
10%), in Meters or Feet.
◼
HDMI HPD.
Hot Plug Detection.
4.2.3.2
Performance Management
To access performance management functionality, tap on the
Performance
button, as shown in the
figure below.
Figure 21: Selecting Performance Monitoring
The system provides performance monitoring of the four HDBaseT channels (each associated with a
twisted pair) in the CATx cable
–
designated A, B, C, and D.
