M Solutions MS-TestPro MS103TDs User Manual Download Page 74

Page: 74 / 113

MS-TestPro

User’s Manual

Page 74 of 113

➔

To access display capabilities using EDID:

Connect the MS-TestPro test device to the HDMI sink device using one of the methods
described above.

Tap on the

EDID Analyzer

button to access information on the display capabilities of the

HDMI sink device. The following screen appears, presenting the sink device display
information, and supported display resolutions.

Figure 91: EDID Information Page

To save EDID data to the tester internal memory, tap the

Save

button.

To download EDID data, connect the USB memory stick and tap the

Download

button.

Two files will be saved

–

EDIDXXXX.txt

and

EDIDXXXX.bin

To delete EDID data from tester, select the files to delete and tap the

Delete

button.

5.3.4.3

Certification report

The certification report menu provides the following capabilities:

◼

Run

–

report data generation

◼

Download (Report Data)

–

saves the report data from the tester to the USB memory stick

◼

Profile

–

profile configuration

◼

Download (PDF Creator Software)

–

downloads PDF Creator Software

Summary of Contents for MS-TestPro MS103TDs


















































































































Search results

Summary of Contents for MS-TestPro MS103TDs

Reviews:

Related manuals for MS-TestPro MS103TDs

Brands by name

Popular brands

M Solutions MS-TestPro MS103TDs, User Manual

Search results

Summary of Contents for MS-TestPro MS103TDs

Reviews:

Related manuals for MS-TestPro MS103TDs

Brands by name

Popular brands