MS-TestPro
User’s Manual
Page 19 of 113
◼
Connecting the CATx cable to the MS-TestPro receiver module, and connecting the
receiver module to the sink device with an HDMI cable.
3.
Insert the power supply connector into the designated socket in the main unit to provide
power.
NOTE
The MS103TDs should be powered by a 48V Power Supply
.
For the MS104B, use a 12.6V Power Charger.
4.2
Performing the Tests
4.2.1
Main Screen
The main screen (see the figure below) offers the following functionalities:
Figure 15: MS-TestPro Main Screen
◼
Information.
The icon provides access to informative guidelines and system documentation.
◼
HDBaseT Analyzer
◼
Basic Analysis: Basic Pass/Fail report.
◼
Performance: Real-time access to HDBaseT cable performance data.
◼
Configuration: Read-only access to the system configuration.
◼
Tools
◼
HDMI Generator: HDMI Pattern Generator.
◼
EDID Analyzer: Access information on the display capabilities of HDMI sink devices.
◼
Certification report: Collect the data required to produce the HDBaseT test report.
