MS-TestPro
User’s Manual
Page 75 of 113
5.3.4.3.1
Run (Generate Data)
The HDBaseT report data collection feature is used to collect the data required to perform HDBaseT
cable analysis.
➔
To access data for HDBaseT cable analysis:
1.
Connect the MS-TestPro test device to both ends of the CATx cable, as shown below in
Figure 33:
◼
The HDMI cable
must
be connected to the Internal Generator to ensure that HDMI
traffic is running on the HDBaseT link.
◼
The “local” side of the cable is connected to either the tr
ansmitter or receiver module,
housed in the MS-TestPro chassis.
◼
The “remote” side of the cable is connected to the other MS
-TestPro module.
Make sure
that the remote module is terminated by a Pluggable POH Adapter as
shown below.
Figure 92: Cable Test Setup
IMPORTANT
The HDMI cable must be connected to the Internal Generator to ensure that HDMI traffic is running on the
HDBaseT link.
HDBaseT
HDMI
