MS-TestPro
User’s Manual
Page 52 of 113
4.3.1
System Upgrade
➔
To upgrade the MS-TestPro System Software:
1.
Prepare a USB memory stick with the upgrade file
updateXXX.mst
in the root folder.
Connect the stick to one of the USB ports in the MS-TestPro device.
2.
Select the
updateXXX.mst
file and tap on the
System Upgrade
button (see the picture
below). The system performs the upgrade and reboots using the new version in
approximately 10 seconds.
IMPORTANT
1.
For firmware version 2.00.30 or earlier, the file name is
update.mst
.
2.
Latest updated FW can be found at
https://www.m4sol.com/support/
3.
Do not switch off the device’s power during the upgrade!
Figure 65: System upgrade
4.3.2
System Reboot
To restart the MS-TestPro test device, tap the
System Reboot
button and
Yes
on the next screen, as
shown in the figure below.
