MS-TestPro
User’s Manual
Page 37 of 113
4.2.4.4
Log Analyzer
The comprehensive Log Analyzer function measures over sixty different parameters. It is intended
to track random failures over a long period of time. The recommended test duration is 24 hours,
allowing you capture the performance of the cable during the course of an entire day. This enables
you to perform an in-depth analysis of any problem. Log files are generated in pairs
–
one for the
transmitter module and one for the receiver module. Up to 5 pairs of log files are stored in the
system. When a 6th pair of log files is generated, the oldest log file pair in the system is
automatically deleted.
4.2.4.4.1
Log Generation
➔
To perform log generation:
1.
To begin log generation, tap on the
Log Analyzer,
then the
Start
button.
2.
To manually end log generation, tap on
Stop
button as shown in the figure below. The
system generates transmitter
and
receiver logs.
Figure 43: Starting Log Generation
4.2.4.4.2
Log Distribution
You can export log files to a USB memory stick for further processing.
