TEO-540-C1A Engine Maintenance Manual
© 2018 Avco Corporation. All Rights Reserved
05-20
November 2018
Page 17
TEO-540-C1A Engine Maintenance Manual
3.
10-Hour Initial Engine Inspection for TEO-540-C1A Engines
A.
Complete this inspection after the first 10 hours of initial operation of the engine.
B.
Copy and complete the 10-Hour Initial Engine Inspection Checklist for TEO-540-C1A
engines as a record of engine service. Record the engine hours.
WARNING
BEFORE ANY ENGINE INSPECTION OR SERVICE PROCEDURE,
MAKE SURE THE IGNITION SWITCH IS SET TO OFF AND THAT ALL
POWER TO THE ENGINE IS DISCONNECTED. ENSURE ALL
OBJECTS/PERSONNEL ARE CLEAR OF THE PROPELLER’S
ROTATIONAL ARC. IF POWER IS ON, A LOOSE OR BROKEN WIRE
CAN CAUSE THE ENGINE TO START AND THE PROPELLER TO
TURN WHICH CAN LEAD TO A PROPELLER STRIKE, SERIOUS
INJURY, OR DEATH.
NOTICE:
Copy the blank checklist and complete this checklist as a record of engine
maintenance. Put the completed checklist in the engine logbook.
10-Hour Initial Engine Inspection Checklist for TEO-540-C1A Engines
Engine Serial Number:____________________ Engine Time:_________________________
Date Inspection Done:_________________ Inspection done by:_______________________
Inspection Item
Comments
Results/Notes
Done
Examine the Engine-to-
Firewall Wiring Harness
(Figure 1). Ensure that its
connectors are attached
correctly and not damaged.
Tighten any loose items on
the wiring harness.
Refer to the "Wiring
Inspection" procedure in
Chapter 72-70.
Examine Firewall-to-
ECU/Power Box Wiring
Harness (Figure 1).
Examine the wiring connection
to the Data Logger (if
applicable).
Tighten any loose items on
the wiring harness.
Refer to the "Wiring
Inspection" procedure in
Chapter 72-70.
Figure 1
Engine-to-Firewall Wiring Harness
