![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qs/grafik-eye-qs_installation-and-operation-manual_1950621061.webp)
Language Selection
The
GRAFIK Eye
®
QS control unit is
capable of operating in the following
languages:
•
English
•
French
•
Spanish
•
German
•
Italian
•
Portuguese
To change the language to one of these
choices, press the Timeclock button
four times, until the “Language” screen
is displayed. (Note: Do not put the unit
in programming mode.) Use the Master
buttons to highlight your preferred
language, and press the OK button to
select and save.
Faceplate Removal
The faceplates may need to be removed
to change the color or to write in zone
labels. To remove either faceplate, open
it fully (flush to the wall), and pull up (for
the top faceplate) or down (for the bottom
faceplate) to pull the hinges out of their
slots.
Replace by sliding the hinges back into
their slots.
®
OK
1
2
3
4
5
6
Pull up to remove
top faceplate
Pull down to
remove bottom
faceplate
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 61
OK
Master
buttons
OK
button
Timeclock
(back) button