![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qs/grafik-eye-qs_installation-and-operation-manual_1950621058.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 58
Afterhours
Setting Up Afterhours
1. Enter programming mode.
2. Use the Master buttons to highlight “Timeclock”, and press
the OK button to accept.
3. Use the Master buttons to highlight “Afterhours setup”, and
press the OK button to accept.
4. Use the Master buttons to select the desired Afterhours mode,
and press the OK button to accept.
5. (If the Afterhours mode was set to “Enabled”)
Use the Master buttons to highlight the desired values for
Flash count, Delay time, Warn time, and Afterhours scene.
Press the OK button to accept each setting. The info screen
will confirm that your Afterhours settings have been saved.
6. Exit programming mode.
OK
1
2
3
4
5
6
Master
buttons
OK
button
Afterhours
Enabled
Flash count
3
Saved
Warn time
minutes
5
Delay time
minutes
15
Afterhours
Scene 5
Ending Afterhours
Once activated, the Afterhours feature can
be overridden at any time and ended through
the programming menu.
1. Enter programming
mode.
2. Use the Master
buttons to highlight
“Timeclock”, and
press the OK button
to accept.
3. Use the Master
buttons to highlight
“End Afterhours”, and
press the OK button
to accept. The info
screen will confirm
that afterhours mode
is ended.
4. Exit programming
mode.
End afterhours
Main menu
Timeclock
Scene setup
Timeclock
Holiday
Afterhours setup
Timeclock