![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qs/grafik-eye-qs_installation-and-operation-manual_1950621011.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 11
Completing Installation of the GRAFIK Eye
®
QS Control Unit
1. Mount the control unit in the wallbox as
shown using the four screws pro vid ed.
Note:
Follow all local and national
electrical codes when installing IEC
PELV/NEC
®
Class 2 wiring with line
voltage/mains wiring.
2. Verify installation:
•
Restore power.
•
Press the top scene button. The LED will
light.
•
Press the zone raise and lower buttons.
Make sure the control unit is dimming all
connected loads.
3. Apply the protective overlay to the control
unit.
Note:
When tightening mounting
screws, make sure that the hinged
cover and faceplate will open fully,
as shown.
Wall
200 mm
87 mm
95 mm
Protective overlay
(apply after installation)