![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qs/grafik-eye-qs_installation-and-operation-manual_1950621040.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 40
An infrared (IR) remote can directly control the GRAFIK Eye
®
QS control unit through
the infrared receiver on the front of the GRAFIK Eye
®
QS control unit.
An externally powered IR repeater can also be connected to the IR terminals on
the GRAFIK Eye
®
QS control unit to obtain IR remote control. This is useful for
integrating third party devices with the GRAFIK Eye
®
QS control unit (e.g. home theater
applications.) For a complete list of the GRAFIK Eye
®
QS control unit’s IR programming
commands, please see www.lutron.com/qs.
An IR remote can also indirectly control the GRAFIK Eye
®
QS control unit through the
QS IR Eye or a Lutron
®
IR receiver wired to a QS Sensor Module (QSM) to control
the light level of a specific zone or to act as a scene controller. The QS IR Eye and IR
receivers wired to the QSM must first be associated with the GRAFIK Eye
®
QS control
unit before they will be recognized by a GRAFIK Eye
®
QS system.
IR Setup
Direct to Grafik Eye
LUTRON
LUTRON
Through QS IREye
LUTRON
Wired to QSM
LUTRON
GRAFIK Eye
®
QS
control unit
IR
Remote
Direct to Grafik Eye
LUTRON
LUTRON
Through QS IREye
LUTRON
Wired to QSM
LUTRON
GRAFIK Eye
®
QS
control unit
IR
Remote
Third
Party
Device
IR Terminal
Direct to Grafik Eye
LUTRON
LUTRON
Through QS IREye
LUTRON
Wired to QSM
LUTRON
GRAFIK Eye
®
QS
control unit
QS Sensor Module
(QSM)
Wired IR
Receiver
IR
Remote
QS Link
GRAFIK Eye
®
QS
control unit
QS
IR Eye
IR
Remote
Direct to Grafik Eye
LUTRON
LUTRON
Through QS IREye
LUTRON
Wired to QSM
LUTRON
QS Link