![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qs/grafik-eye-qs_installation-and-operation-manual_1950621041.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 41
Enabling/disabling the IR receiver on the GRAFIK Eye
®
QS control unit:
Note:
These steps will also enable or disable the IR terminals on the
GRAFIK Eye
®
QS control unit.
1. Enter programming mode.
2. Use the Master buttons to highlight “IR Setup” and press the OK button to
accept
3. Use the Master buttons to highlight “Integral IR” and press the OK button to
accept.
4. Use the Master buttons to highlight either “Enabled” or “Disabled” and press
the OK button to accept. The info screen will confirm that your settings have
been saved.
5. Exit programming mode.
Saved
Saved
IR Setup
Main menu
Wireless Mode
IR menu
Timeclock
Programming
IR Setup
Integral IR
Integral IR
Enabled
OK
1
2
3
4
5
6
9
10
11
12
13
14
7
8
15
16
9-16
1-8
Master
buttons
OK
button