Troubleshooting
Error Messages
WaveLAN/EC-S User’s Guide
B-7
Error Messages
B
When displaying the Device Info/Event log, your WaveLAN/EC-S
device may list one of the following error messages, in case it
detected an error.
Error Type
Error Message
Description/Action
Hardware
FLASH failure; unable to
read or write configuration
FLASH may be damaged.
Configuration cannot be
accessed or saved.
Initialization of interface
“lanX” failed.
Radio could not be initialized.
Possibly a hardware or software
failure.
Software
Flow control overflow.
This indicates a software bug.
Flow control underflow.
This indicates a software bug.
xxxx: file does not exist.
Configuration file could not be
found. This indicates a software
bug
Configuration xxxx: [yyyy]: section does
not exist.
Section named yyyy in
configuration file named xxxx
was missing.
xxxx: [ip]: “zzzz”: entry
refers to non-existent
section.
Entry zzzz refers to a section that
is not located in file xxxx.
xxxx: [yyyy]: “zzzz”: entry
does not exist.
Entry zzzz in section yyyy of file
xxxx was missing.
xxxx: [ip]: “zzzz”: entry is
invalid.
Entry zzzz in section yyyy of file
xxxx contains an invalid value.
Unable to bring up interface
“lanX”.
Configuration values for the radio
may be incorrect.
xxxx: <[yyyy]zzzz>:
Unable to add route.
Route values are out of range
compared to the interface values.
SCCUART_Restart: Out of
buffer memory; efficiency
reduced.
Buffer allocation values are too
high. Values were automatically
reduced.