Configuring WaveLAN/EC-S
Running WaveMANAGER/EC
WaveLAN/EC-S User’s Guide
3-5
Access the WaveLAN/EC-S Configuration
3
If your WaveMANAGER/EC program displays one or more
WaveLAN/EC-S devices the devices will be identified by their
unique MAC Address and Serial number.
To avoid tampering with the configuration of the device, the
configuration parameters are password protected.
To display the configuration of a WaveLAN/EC-S device:
1.
Select the device of your choice, and click the “Setup” button.
2.
Click the “Configure” button to open the “Enter Password”
window pictured in Figure 3-2.
3.
Enter the password for this device and click OK.
The default password value is “public”
Figure 3-2 Enter WaveMANAGER/EC-S Password
This will open the “Setup Ethernet Converter” screen as pictured in
Figure 3-3 on page 3-6.
■
To set the generic WaveLAN parameters, proceed with “Set
the WaveLAN Parameters” on page 3-6
■
To set the specific parameters for this WaveLAN/EC-S device,
proceed with “Set the EC-S Specific Parameters” on page
3-17.
