Lucent Technologies WaveLAN/EC-S User Manual Download Page 17

Page: 17 / 150

Introduction
Kit Contents

WaveLAN/EC-S User’s Guide

1-5

WaveLAN/EC-S Features

Looking at your WaveLAN/EC-S device, you can identify the
following items as pictured in Figure 1-2.

Yoke (to secure the WaveLAN PC card when inserted into the
WaveLAN/EC device).

Release button to remove the Yoke from the WaveLAN/EC
device.

LED’s (see Appendix B for a description of LED activity).

Connector for the power adaptor

Reset/Config button, described in Chapter 4 and Appendix B.

RJ45 Ethernet connector (twisted pair) supporting 10Mbps
Ethernet data rates.

RS-232 serial connector, supporting serial data rates from
112.5 up to 230,400 bps full duplex

Figure 1-2 WaveLAN/EC-S Components

The WaveLAN/EC-S device is shipped without a WaveLAN IEEE
802.11 PC Card. Please consult Chapter 2 ”Hardware Installation”
for instructions on how to insert a separately purchased WaveLAN
PC Card into the WaveLAN/EC-S device.

Summary of Contents for WaveLAN/EC-S






















































































































































Search results

Summary of Contents for WaveLAN/EC-S

Reviews:

Related manuals for WaveLAN/EC-S

Brands by name

Popular brands

Lucent Technologies WaveLAN/EC-S, User Manual

Search results

Summary of Contents for WaveLAN/EC-S

Reviews:

Related manuals for WaveLAN/EC-S

Brands by name

Popular brands