Lucent Technologies PortMaster, Configuration Manual

Page: 84 / 364

Configuring a PortMaster for Login Users
5-8 PortMaster Configuration Guide
To enable the idle timer and set a timeout value, use the following command:
Command> set S0 | all idletime Number [ minutes | seconds ]
To disable the idle timer, set it to 0.
Configuring a PortMaster for Login Users
A PortMaster can be configured to allow dial-in users to log in to a specified host. This
configuration is called
user login . In user login mode, the user is prompted for his or
her login name after the attached modem answers and completes rate negotiation. Once
the user is identified as a valid user through the user table or RADIUS security, a login
session is established on the host specified for the asynchronous port.
Figure 5-1 User Login Configuration
In Figure 5-1 the user named susan is verified as an authorized user and is connected to
the host named sales , which has been specified as the host for this port.
PortMaster
11820001
11820001
user susan
host sales
workstation 2
serial
connection
workstation 1