...........................................................................................................................................................................................................................................................
Equipment and Cable Installation for Metropolis
®
DMXtend
Shelf Horizontal Bay Mount
DS3/EC-1Cable Installation
1 - 2 6
Lucent Technologies - Proprietary
See notice on first page
365-372-327 R2.0
Issue 1, October 2003
additional DS3 capacity ports (25 - 48) are cabled to the center
connectors of the shelf (J2D, J4D, J8G, and J10G).
............................................................................................................................................................................
Step 2
Connect the function group cables at the Metropolis
®
DMXtend end,
carefully matching the correct connector with the appropriate
backplane connectors as shown in Figure 1-10, DS3/EC-1 Cable
Connections (page 1-27)
Important!
The 12 conductor DS3 cables that support the LNW16
12DS3/EC1 pack connect only to the right side connectors (J1D,
J3D, J7G, and J9G) the connectors in the center of the backplane
(J2D, J4D, J8G, and J10G) are not used with the LNW16. See
Table 1-6, DS3/EC-1 Cable Assemblies (page 1-30) for more
information.
Important!
The first 12/24 DS3s of a Function Group, must be
connected to the right side connectors (J1D, J3D, J7G, and J9G).
See Figure 1-11, DS3/EC-1 Cable Routing to the Right (page 1-27).
The additional capacity of 24 DS3s (36 additional DS3s, 13-48,
available when the LNW19 is supported in a future release) of the
Function Group use the connectors located to the center of the
backplane (J2D, J4D, J8G, and J10G).
Important!
The 24 conductor DS3 cables that connect to the right
side connectors (J1D, J3D, J7G, and J9G) are different from the 24
cable DS3 cables that connect to the connectors in the center of the
backplane (J2D, J4D, J8G, and J10G). See Table 1-6, DS3/EC-1
Cable Assemblies (page 1-30) for more information.
Function Group
Associated Connector (DS3)
G
G IN (J7G and J8G) G OUT (J9G and J10G)
D
D IN (J1D and J2D) D OUT (J3D and J4D)