Lucent Technologies J85500D-3 Product Manual Download | Manualshive

Page: 22 / 118

background image

Lucent Technologies Lineage

®

2000 ECS Battery Plant J85500D-3

2 - 4 Product Description

Issue 5 January 1999

ECS battery
plant physical
description

The Lineage

®

2000 Evolutionary Control System (ECS) Battery

Plant is shown in Figure 1-1. The ECS battery plant provides
power for the using equipment as well as float and recharge
capability for the battery reserve. The plant operates from a
nominal 208/240 Vac, 50/60 Hz source. It offers a 300-ampere
total plant capacity with a nominal -48 Vdc output. The ECS
battery plant can be mounted on a battery stand which provides
space for one 48-volt string of VR Series batteries or on a battery
stand which provides space for four 48-volt strings of 12IR125
batteries. The ECS plant is capable of operating in a batteryless
mode, making it suitable for those applications where battery
backup is not necessary or is provided by an uninterruptible
power supply (UPS).

The ECS battery plant uses state-of-the-art technology to
achieve dramatic equipment size and weight reduction and to
minimize maintenance. These advantages are realized by the
application of Switch-Mode Rectifier (SR) and Valve-Regulated
(VR) battery technologies and a unique plug-in rectifier and
circuit breaker design.

The ECS battery plant is designed as a totally integrated energy
system package. It is a compact and complete system containing
a controller, rectifiers, circuit breaker distribution panel and
optional automatic battery disconnect/reconnect (LVD/R)
feature, optional low voltage load disconnect feature, batteries,
and optional thermal slope/step compensation feature. The plant
is a modular front-access design for ease of installation, growth
and maintenance. This power system is ideal for use in confined
areas and enables one to utilize valuable floor space in a more
efficient manner.

Initial bay

The initial bay will accommodate a maximum of six Lineage

®

2000 SR Series 50 ampere rectifiers, a Lineage

®

2000 ECS

controller, a distribution panel capable of accepting a maximum
of 42 circuit breakers/fuses of 3 to 50 ampere capacity, or 20
circuit breakers of 60 to 100 ampere capacity, a low voltage
battery disconnect/reconnect feature, low voltage load
disconnect feature and one 48-volt string of Lineage

®

2000 VR

Series, 250- or 375-ampere hour batteries, or four 48-volt strings
of Lineage

®

2000 125-ampere hour IR Series batteries.

Supplementary

bays

If additional battery reserve is required, supplementary bays are
available which can each house up to two 48-volt strings of

«
...
20
21
22
23
24
...
»

Summary of Contents for J85500D-3























































































































Reviews:

No comments

Related manuals for J85500D-3

Brand: Hansen Pages: 72

WAGO-PERSPECTO 762 Series

Brand: WAGO Pages: 2

Brand: 3nStar Pages: 14

Brand: Sammode Pages: 12

Brand: CDVI Pages: 2

Brand: SCHUNK Pages: 24

Brand: REMS Pages: 96

Brand: VARMEC Pages: 116

Brand: Festo Pages: 98

Brand: Jetting Pages: 16

Brand: Lennox Pages: 25

Brand: Gorlitz Pages: 28

Brand: PI Pages: 42

Brand: McElroy Pages: 142

Brand: Ulvac Pages: 29

Brand: Ulvac Pages: 39

Brand: SixCase Pages: 54

Brand: GFA Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands