LSIS XGL-C22A, User Manual, Page: 85 / 299

Chapter 6 Communication Parameter
6-33
(2) P2P channel setting
Cnet I/F module provides 2 communication channels (channel 1, channel 2) separately operated.
Driver type of the channels can be defined respectively for P2P service. In order for P2P channel to operate as client, active
mode of standard settings should be ‘Use P2P’. Channel setting according to active is as follows.
Active mode P2P Channel setting
When selecting
‘
Use P2P
’
in the active mode, available driver and meaning in the XGT Cnet are as follows.
Driver Meaning
User definition frame When sending/receiving the user definition frame
XGT client When reading/writing the memory of XGT
Modbus ASCII client When acting as Modbus client and ASCII mode
Modbus RTU client When acting as Modbus client and RTU mode
[Table 6.6.3] Driver table
If XGT or modbus is selected as P2P driver about communication channel, the user definition frame can’t be used.