LSIS XGL-C22A, User Manual, Page: 84 / 299

Chapter 6 Communication Parameter
6-32

P2P parameters registration window

Up to 8 P2P parameters can be set

Multiple P2P parameters can be set for an identical Cnet I/F module
However, Enable is available only for 1 parameter among the multiple P2P parameters for the identical Cnet I/F
module

Respective P2P parameter is composed of P2P channel, P2P block and user defined frame

P2P edit window

Up to 64 P2P blocks can be registered and edited.
(1) Configuration of P2P parameters
In order to use P2P service the user needs to execute setting for the operation desired on the P2P parameters window.
P2P parameters are composed of 3 kinds of information as shown in the figure below
[Figure 6.6.4] P2P parameter configuration screen
▶
P2P channel

P2P channel setting to define the communication protocol of the P2P service to execute

XGT/Modbus available

Separate setting for respective channels. Applied only if basic setting’s “P2P driver” is None.
▶
P2P block

64 P2P blocks setting separately operated
▶
User definition frame

Registration of user defined frame