LSIS XGL-C22A, User Manual, Page: 102 / 299

Chapter 6 Communication Parameter
6-50
(3) Meaning of status by service
Classification Item Contents
Dedicated
Service
Standard
information
Base Number Information of base number under diagnosis
Slot Number Information of slot number under diagnosis
Link type Type of communication module under diagnosis
Dedicated service
information
Drive type by service
Detailed
information
window
Port number Channel number
Service count Indicates how many dedicated service communication is done
Error count
Indicates how many error occurs during dedicated service
communication
Status Indicates status of dedicated service communication
P2P
Service
Standard
information
Base Number Information of base number under diagnosis
Slot Number Information of slot number under diagnosis
Link type Type of communication module under diagnosis
P2P
service
information
P2P parameter
existence
Indicates whether P2P parameter exists or not
Driver type
Indicates the P2P driver by port
XGT/Modbus/User definition frame
Detailed
information
Block number
Available range:0~63
Only block under operation is indicated.
Port number Indicates the channel number
Status Indicates the status by service
Service count Indicates how many P2P service is done.
Error count Indicates how many error occurs during service
Multiple
reading/
Refresh Multiple reading Checks the P2P service status every second.
Refresh Check the P2P service status when refresh is done.
(4) Error according to status code by service
It is used to check whether Cnet I/F module is normal or not.
Dedicated service P2P service
Status Meaning Status Meaning
0 Normal 0 Normal
1
Error of RX frame head
(There is no ACK/NAK.)
4
Error of max. station number
(Available range: 0~31)
2
Error of RX frame tail
(There is no tail.)
5 Time out
3 BCC error of RX frame FFFE
1. Modbus address error
2. Commands except Read/Write are used.
9
Station number of RX frame is different with self
station number (Self station number = 0)
-
0A In case of not get response from CPU
0B
RX frame size exceeds the modbus max.
frame size
0C RX frame is not Modbus ASCII/RTU.
0D HEX conversion error in Modbus