LSIS LSLV0055H100-4COFN, Manual

Page: 367 / 610

353
RS-485 Communication Features
Code Description
7.2.3 Setting Operation Command and Frequency
After setting the DRV-06 Cmd Source code to ‗3 (Int 485)‘ and DRV-07 Freq Ref Src code
to ‗6 (Int 485)‘, you can set common area parameters for the operation command and
frequency via communication. For details about the operation command, refer to
4.6.4 RS-
485 Communication as a Command Input Device
on page
105
and about the frequency
command, refer to
4.2.6 Setting a Frequency Reference via RS-485 Communication
on
page
98
.
To select the built-in RS485 communication as the source of command, set DRV-07 to ‗6
(Int485)‘ on the keypad. Then, set common area parameters for the operation command
and frequency via communication.
Group Code Name LCD Display
Parameter
Setting
Setting
range
Unit
DRV
06 Command source Cmd Source 3 Int 485 0–5 -
07
Frequency setting
method
Freq Ref Src 6 Int 485 0–11 -
7.2.4 Command Loss Protective Operation
Configure the command loss decision standards and protective operations run when a
communication problem lasts for a specified period of time.
Group Code Name LCD Display
Parameter
Setting
Setting
range
Unit