LSIS LSLV0055H100-4COFN, Manual

Page: 305 / 610

291
Learning Advanced Features
It is used to control multiple inverters with an inverter. When [AP1-40 MMC Sel] is set to <2 : Multi
Follower> or <3 : Multi Master>, it is called as {Leader Drive}. The rest inverters set to <4 : Serve Drv>
are called as {Serve Drive}.
Leader Drive
It is an inverter to execute PID control with PID Feedback from sensor, control Multi Motor and
function as Master of communication.
In addition, if it is set to Leader Drive, Drive turned on at first performs functions of Soft Fill(Pre-PID),
Sleep/WakeUp and Aux Motor PID Compensation).
Serve Drive
It is an inverter to operate motors with Leader Drive.
Each inverter and motor has the same number(ID), [COM-01 Int485 St ID].
Among the operating motors, the motor with the lowest priority is called Main Motor and the rest of
motors are called as Aux Motor.
※
In case that every motor is stopped, the motor with the highest priority is called as Main Motor.
This is, Main Motor and Aux Motor are changed according to the situation and Leader Drive and
Serve Drive are fixed.
The picture below represents foundational composition.
Leader Drive
ID 1
Main
Motor
M1 M2 M3 M4 M8
Serve Drive
ID 2
Serve Drive
ID 3
Serve Drive
ID 4
Serve Drive
ID 8
Inverter
Setting
Communication
Line
Sensor
Aux
Motor
Aux
Motor
Aux
Motor
Aux
Motor