LSIS LSLV0055H100-4COFN, Manual

Page: 315 / 610

301
Learning Advanced Features
Code Description
13 EPID1 Output Output is based on the output value of the
external PID1 controller. Outputs 10 V in 100%.
14 EPID Ref Val Output is based on the reference value of the
external PID1 controller. Outputs 6.6 V in 100%.
15 EPID Fdb Val Output is based on the feedback amount of the
external PID1 controller. Outputs 6.6 V in 100%.
OUT-02 AO1
Gain,
OUT-03 AO1
Bias
Adjusts output value and offset. If frequency is selected as an output item,
it will operate as shown below.
𝐴𝑂1 =
𝐹𝑟𝑒𝑞𝑢𝑒𝑛𝑐𝑦
𝑀𝑎𝑥𝐹𝑟𝑒𝑞
× 𝐴𝑂1 𝐺𝑎𝑖𝑛 + 𝐴𝑂1 𝐵𝑖𝑎𝑠
The graph below illustrates how the analog voltage output (AO1) changes
depending on OUT-02 (AO1 Gain) and OUT-3 (AO1 Bias) values. The Y-
axis is analog output voltage (0–10 V), and the X-axis is a % value of the
output item.
Example, if the maximum frequency set at DRV-20 (Max Freq) is 60 Hz
and the present output frequency is 30 Hz, then the x-axis value on the
next graph is 50% .
OUT-04 AO1
Filter
Set filter time constant on analog output.
OUT-05 A01
Const %
If the analog output at OUT-01 (AO1 Mode) is set to ‘12 (Constant)‘, the
analog voltage output is dependent on the set parameter values (0–