LSIS LSLV0055H100-4COFN, Manual

Page: 313 / 610

299
Learning Advanced Features
5.47 Analog Output
An analog output terminal provides an output of 0–10 V voltage, 4–20 mA current, or 0–32
kHz pulse.
5.47.1 Voltage and Current Analog Output
An output size can be adjusted by selecting an output option at the AO (Analog Output)
terminal. Set the analog voltage/current output terminal setting switch (SW5) to change the
output type (voltage/current).
Group Code Name LCD Display Parameter
Setting
Setting Range Unit
OUT
01 Analog output1 AO1 Mode 0 Frequency 0–15 -
02 Analog output1 gain AO1 Gain 100.0
-1000.0–
1000.0
%
03 Analog output1 bias AO1 Bias 0.0 -100.0–100.0 %
04 Analog output1 filter AO1 Filter 5 0–10000 ms
05
Analog constant
output1
AO1
Const %
0.0 0.0–100.0 %
Note
Press regeneration prevention does not operate during accelerations or decelerations; it only
operates during constant speed motor operation. When regeneration prevention is activated,
output frequency may change within the range set at ADV-76 (CompFreq Limit).