LS tractor MT2 25S, Operator'S Manual

Page: 97 / 187

4 - 17

Adjust the length of the upper link
①
depending
on the implements.

To adjust the length of the upper link, loosen the
lock nut
③
and turn the grip
②
left or right.

Fasten the lock nut
③
after adjusting the length.

Adjustment range: 400~750mm (15.7~29.5 in.)
▶
Insert the snap-pin
⑤
firmly to prevent the upper link pin
④
from being escaped. Notice
②
Adjustment of the lift rod’s length

The Lift rod (RH) can be adjusted by loosening
the lock-nut
②
, and turning the grip
①
.

After adjusting the length, tighten the lock-nut
②
again.

Adjustment range: 348~461mm (13.7~18.1 in.)
②
①
④⑤
③
①
Upper link installation and adjustment
▶
Do not adjust the length of the lift-rod over the maximum limit. It may cause fatal
injury or death by falling object.
Caution
▶
Do not adjust the length of the upper link over the maximum limit. It may cause
fatal injury or death by falling object.
Caution
①
②