LS tractor MT2 25S, Operator'S Manual

Page: 59 / 187

3 - 3
6
7
3
5
4
3
Cold start aid indicator

When turning start-key switch to “ Preheat ”
position, this indicator will be turned on. It
remains lit for as long as key switch is in the
“Preheat” position, during which time the glow
plugs are heating the combustion chambers.

When turning start-key switch to “ Start ” position,
this indicator will be turned on as well.
4
High beam indicator

When turning the light switch to “ HIGH BEAM”
position, the high beam of the front headlights
and this indicator will be turned on.
5
Engine coolant temperature gauge

This gauge indicates the engine coolant temperature during operation.

It activates when the operator turns the key switch to the ON position. The gauge will register cold
with the key switch in the OFF position.

The closer the needle approaches “ H ” mark, the higher the temperature of engine coolant is.

If the needle of engine coolant temperature gauge indicates red zone, Stop the engine immediately
and check the engine cooling system. (coolant, radiator screen, fan belt, …)

The radiator and coolant is very hot. When checking the coolant level, comply with the instructions
of the chapter 5-10-(1), “Replacement of Engine coolant” in this manual.
6
Tachometer

It registers engine Revolutions Per Minute (RPM). The display will return to zero when the engine is
not running.
7
Hourmeter

It records the hours that your tractor has been operated regardless of the engine RPM. Use the
hourmeter as a guide to determine hourly service and maintenance intervals.

The number 0005.3 in hourmeter shows that the tractor has been used for 5.3 hours.
(5 hours and 18 minutes).
2
PTO operation indicator

When turning PTO switch ON while the engine is
running and PTO lever (if fitted) is engaged, the
PTO shaft shall rotate and this indicator shall be
turned on.
PTO switch