LS tractor MT2 25S, Operator'S Manual, Page: 73 / 187

3 - 17
Middle PTO lever
(6) Rear PTO lever

It is used to engage/disengage the rear PTO
gear. 540 RPM gear and neutral position is
available.

Before operating the rear PTO lever, depress the
clutch pedal and put PTO switch to “ OFF”
position, and stop the PTO shaft completely.

Push the rear PTO lever forward to engage the
540 RPM gear, and pull the lever rearward to
disengage the rear PTO.

For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.
540rpm
Neutral
Notice
▶
Operate the PTO gear lever by correct “I” pattern. If operated diagonally, it may
cause a failure.
▶
If the PTO gear lever is not engaged smoothly, shift the lever again after lifting up
the implement from the ground to align the drive shaft.
Forward
(7) Middle PTO lever

It is used to engage/disengage the middle PTO
gear.

Before operating the middle PTO lever, put PTO
switch to “OFF” position and stop the PTO shaft
completely.

Push the middle PTO lever forward to engage
the middle PTO gear, and pull the lever rearward
to disengage the middle PTO gear.

For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.
Engage
Forward
Rear PTO lever
Disengage