LS tractor MT2 25S, Operator'S Manual

Page: 107 / 187

4 - 27
(7) Using Front-end loader (optional)
①
Safety precautions

If attaching a non-approved front-end loader or
heavy front-mounted implement, engine block or
front axle can be damaged or broken. Contact
your authorized local dealer.

DO NOT attach any non-approved front-
mounted implement by manufacturer. If it is
ignored, and any warranty is not effective no
longer.

If an approved front-end loader is attached,
multi-functional joystick lever in the right figure
can provide you more convenient operation.

When operating the tractor with front-end loader,
The center of gravity of the tractor may be higher,
and the stability of the vehicle may be worse
than unattached vehicle.
-. DO NOT drive fast on a traffic load. The rolling
or tipping of the tractor can be happened easily.
-. When loading/unloading the bucket on a slope,
move the tractor straight against the slope.
-. DO NOT try to approach a stiff slope.
-. Attach the rear ballast on the 3-point linkage or
rear wheels(if applicable) to prevent overload of
the front axle and to improve the stability of the
vehicle.

When working with front-end loader, the front
visibility of the tractor may be worse than
unattached vehicle. Have to observe people and
other vehicles around the tractor.

DO NOT allow people under the front-end loader
while lifted.

DO NOT allow people on the bucket.
TO AVOID PERSONAL INJURY !
▶
After using the front-end loader, push the locking lever to the lock position.
▶
When leaving the tractor, lower down the front-end loader on the ground.
▶
Do not lift the front-end loader to a height from which objects may fall or roll onto
the driver.
▶
Use always the correct attachment (grab forks, buckets.. etc.) for the specific task
to perform and ensure that the load is securely kept in place.
Warning
Locking lever
(safety device)
Lock
Joystick lever
Joystick lever
Loader up
Loader down
Bucket up
Bucket dump
Bucket floating
<Meaning of symbols>