4 - 11
(2) Light operation
Use the hazard warning lights and headlights
(low beam) when you are traveling on public
roads day or night.
Do not modify the lamps or change the bulb
capacity arbitrarily.
When driving the tractor on public roads,
operate the lights according to your local traffic
regulations.
For the details about light operation, refer to
the chapter 3 in this manual.
Your tractor is equipped with the following
lights.
▶
Modified lamps or change bulb capacity may cause a traffic accident by disturbing
approaching driver’s views.
▶
If the lamp is blown out, replace it immediately with a genuine part. In case of
driving at night, it may cause a traffic accident.
Warning
▶
If using the hazard warning lights for a long time while the engine is stopped, the
battery can be discharged completely due to high electrical power consumption.
Caution
①
Turn signal lights and Hazard warning lights
②
Rear work light
②
(optional) mounted behind
the Roll Over Protective Structure (ROPS).
③
Tail lights and brake lights
④
Headlights
4
3
2
1
Summary of Contents for MT2 25S
