LS tractor MT2 25S, Operator'S Manual

Page: 71 / 187

3 - 15
▶
When driving on the road at
night, do not let the rear work
light stay “ON”. It may cause a
disturbance to the driver of the
following car.
Caution
(3) Rear work light switch

There is a switch to turn on/off the rear work light
①
.

Operate the switch on its back as the right figure.
ON
OFF
1
Forward
▶
When driving on public roads, disengage the 4WD. If not, it may cause damage of
the transmission drive line and a serious accident. After working, before coming out
from the field, disengage the 4WD.
▶
When driving the tractor at high speed while the 4WD is engaged, sharp steering
may cause an accident.
(2) 4WD lever

This lever is used to engage/disengage the four
wheel drive (4WD).

Before operating the 4WD lever, release the
HST pedal, press down the brake pedal and stop
the tractor completely.

Pull the lever rearward to engage the 4WD and
push the lever forward to disengage the 4WD.

Four wheel drive (4WD) is effective for the
followings.
-when traction is needed in plow ground.
-when working on slippery ground.
-when working with tiller on hard ground.
-When crossing a ridge
Caution
4WD lever
2WD
4WD