66
To turn the FishTrack feature off, press the menu
key and select “SONAR SETUP”. Choose “FISH
ID” from this menu. Now press the right arrow
key to highlight the “TRK” FishTrack feature. To
turn FishTrack off, press the left arrow key on
the Fish ID menu.
CHART DISPLAY
The chart display lets you set up the screen to
show the digital displays, such as depth, tem-
perature, and water speed. You can also turn the
zoom bar and zone alarm bars on or off. To make
these changes, press the MENU key and select
“SONAR SETUP”, then select “CHART DIS-
PLAY”. The screen shown at right appears.
The digital depth display at the top left corner of
the screen normally shows in large numbers. You can change this to smaller
numbers or turn it off completely by selecting “DIGITAL DEPTH” at the
top of the screen.
Use the up or down arrow keys to select an item, then use the left or right
arrow keys to change it. Press the EXIT key to erase this menu.
Zoom Bar
The zoom bar shows the section of water on the
right side of SONAR-2 that is being enlarged on
the left side. To turn the zoom bar on continu-
ously, select “ ZOOM BAR” on the “CHART DIS-
PLAY” menu, then press the right arrow key. Now
press the EXIT key. A screen similar to the one
at right appears. Press the up arrow key to move
the zoom bar up or the down arrow key to move
it down. This moves the zoom coverage area. To
turn the zoom bar off, repeat the above steps.
Summary of Contents for GlobalMap 1600
Page 1: ...INSTALLATION AND OPERATION INSTRUCTIONS LMS 160 and GlobalMap 1600 TM...
Page 6: ...Notes...
Page 90: ...84 Notes...
