33
reset the timer to zero, select the “UP TIMER
RESET” menu. The up timer also has an alarm
that can be set to sound at a preset time. (For
example, one hour from now, three hours, etc.)
To set the alarm, highlight the “SET UP TIMER
ALM” and press the right arrow key. The screen
below right appears.
Using the arrow keys, highlight the first number
in the time that you want to set. (The time is in
hours, minutes, and seconds) Now press the up
or down arrow keys until the desired number
shows. Continue until the time shown in the dis-
play is correct, then press the ENT key. The unit
returns to the timer menu screen. To turn the
alarm on, highlight the “UP TIMER ALARM” la-
bel. Press the right arrow key. Press the EXIT
key to erase the menu. The time you set shows
in the “UP TIMER” box . The timer continues counting until you stop it.
When it reaches the alarm’s time setting, a tone sounds. Press the EXIT
key to shut the alarm off.
The countdown timer starts from a time that you enter and counts down
to zero. (Note: When the countdown timer reaches zero, it begins count-
ing up until you press the EXIT key. This tells you how long it’s been since
the alarm sounded.) Use the “DOWN TIMER SETUP” menu to adjust the
countdown timer and reset it to zero.
Group K - LMS-160 Only
This group has a map on the left half of the screen
and sonar on the right. When the MENU key is
pressed while Map-3 is showing, the "ACTIVE
MODE" menu at the top of the menu lets you
switch the arrow and zoom keys between the GPS
side and the sonar side of group K.
Summary of Contents for GlobalMap 1600
Page 1: ...INSTALLATION AND OPERATION INSTRUCTIONS LMS 160 and GlobalMap 1600 TM...
Page 6: ...Notes...
Page 90: ...84 Notes...
