Lowrance AirMap 300, Installation And Operation Instructions Manual

Page: 15 / 96

11
YOKE MOUNTING
Included with your AirMap 300 is a yoke mounting bracket. It secures to
the yoke’s shaft with a clamp. Follow the instructions included with the
yoke mount to assemble and attach it to your aircraft. The AirMap 300
attaches to the yoke mount with hook and loop material which is already
attached to the back of your unit. Simply press the AirMap 300 onto the
hook and loop material that’s on the yoke mount.
Make certain to push the antenna back as far as it will go. It needs to be
as parallel to the ground as possible in order to receive signals from the
satellites. See the drawings below for a typical installation.
When the AirMap 300 is attached to the yoke mounting bracket, it can
operate from batteries or the external power cord. To use the external
power cord, simply plug one end into the power connector on the right
side of the AirMap 300 and the other end into the aircraft’s cigarette lighter.