Lovibond MD 610 Instruction Manual Download Page 254

Page: 254 / 360

246

MD 610_1c 09/2015

Polyacrylate

with Liquid reagent

1 – 30 mg/l

1. Fill a clean vial (24 mm Ø) with

10 ml of the water

sample

, close tightly with the cap.

2. Place the vial in the sample chamber making sure that

the marks are aligned.

3. Press

ZERO

key.

4. Remove the vial from the sample chamber.

5. Add

1 ml (25 drops) KS255 (Polyacrylate reagent 1)

to the water sample (note 1).

6. Close the vial tightly with the cap and swirl gently several

times.

7. Add

1 ml (25 drops) KS256 (Polyacrylate reagent 2)

to the water sample (note 1).

8. Close the vial tightly with the cap and swirl gently several

times.

9. Place the vial in the sample chamber making sure that

the marks are aligned.

10. Press

TEST

key.

Wait for a

reaction period of 10 minutes

After the reaction period is finished the measurement
starts automatically.

The result is shown in the display in mg/l Polyacrylic Acid
2'100 sodium salt.

prepare Zero
press ZERO

Zero accepted
prepare Test
press TEST

Countdown
10:00

Summary of Contents for MD 610









































































































































































































































































































































































Search results

Summary of Contents for MD 610

Reviews:

Related manuals for MD 610

Brands by name

Popular brands

Lovibond MD 610, Instruction Manual

Search results

Summary of Contents for MD 610

Reviews:

Related manuals for MD 610

Brands by name

Popular brands