I472 GB I 01 19
31100284
3
G
B
1 SAFETY INFORMATION
1.1 RESIDUAL HAZARDS
The user must take the residual hazards mentioned into consideration in the risk assessment for his/her machine/system.
If the above is disregarded, this can lead to severe injuries to persons and damage to material assets!
PRODUCT
Observe the warning labels on the product!
ICON DESCRIPTION
Electrostatic sensitive devices
Before working on the drive, the staff must ensure to be free of electrostatic charge!
Dangerous electrical voltage
Before working on the drive, check whether all power connections are dead! After mains OFF, power connections X100 and X105 carry a dangerous electrical
voltage for the time specified on the drive!
High leakage current
Carry out fixed installation and PE connection in compliance with EN 61800-5-1 or EN 60204-1!
Hot surface
Use personal protective equipment or wait until devices have cooled down!
MOTOR
If there is a short circuit of two power transistors, a residual movement of up to 180°/number of pole pairs can occur at the motor! (For 4-pole motor: residual movement max. 180°/2 = 90°).
This residual movement must be taken into consideration by the user for his/her risk assessment.
1.2 INTENDED USE
The product:
– must only be actuated under the operating conditions prescribed in this documentation.
– meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
– is not a machine in terms of 2006/42/EC: Machinery Directive.
– is not a household appliance, but is only designed as component for commercial or professional use in terms of EN 61000-3-2.
2 PRODUCT DESCRIPTION
