LOVATO ELECTRIC VLB Series, Installation Manual

Page: 20 / 78

I472 GB I 01 19
31100284
20
G
B
5.3 COMMAND THE RUN/STOP OF THE MOTOR
5.3.1 2-wires control from the flexible I/O terminal block
5.3.2 From keypad
Parameter Function Setting Description
P400.01 VSD enable 1 VSD always enabled (default setting)
P400.02 Run/stop command 11 Run/stop command from digital input DI1 (connected between terminals DI1-24V)
NO
COM
NC
24E
GND
AI1 AI2
AO1 10V 24V
DI1 DI2 DI3 DI4 DI5
DO1 GND
5.3.3 3-wires control from flexible I/O terminal block
Parameter Function Setting Description
P400.01 VSD enable 1 VSD always enabled (default setting)
P400.02 Run/stop command 11 Run/stop command is given by DI1 (NC contact). It serves as start enable for the
function “Start forward” (P400.06).
P400.06 Start forward command 12 Start forward command from DI2 (NO contact)
NO
COM
NC
24E
GND
AI1 AI2
AO1
10V 24V
DI1 DI2 DI3 DI4 DI5
DO1
GND
Parameter Function Setting Description
P400.01 VSD enable 1 VSD always enabled (default setting)
P400.12 Keypad control 1 Activate keypad as control source
P400.02 Run/stop command 1 Constant true (run/stop command is managed by keypad)
Start
Stop
Stop
24E
24E
Run/Stop
Start forward