Chapter 15 STP/RSTP Setup
71
Set up the LAN span tree link type. Key in the command
set spantree link-type
followed by the Port type
( we chose
lan1
), followed by the type of link (we chose
p-to-p
). Press Enter. A sample screen is shown
below.
Set up the WAN span tree link type. Key in the command
set spantree link-type
followed by the Port
type ( we chose
wan1
), followed by the type of link (we chose
p-to-p
). Press Enter. A sample screen is
shown below.
Set the LAN edge-port to ON. Key in the command
set spantree edge-port
followed by the Port type,
(we chose
lan1
), followed by
on
. Press Enter. A sample screen is shown below.
Set the WAN edge-port to ON. Key in the command
set spantree edge-port
followed by the Port type,
(we chose
wan1
), followed by
on
. Press Enter. A sample screen is shown below.
Summary of Contents for IP6610
Page 2: ...2011 Loop Telecommunication International Inc All rights reserved Version 33 23 MAR 2011...
Page 76: ...Chapter 11 Port Forwarding Virtual Service 53...
Page 79: ...Chapter 12 QoS 56 Figure 12 1 QoS Application...
Page 119: ...Chapter 20 Setting Up Firmware Configuration Up Download with TFTP Server 96...
