Loop Telecom IP6610, User Manual

Page: 163 / 190

Chapter 21 Appendix A: Operation Commands
140
Syntax: set svlan pcp action
Explanation: Set the svlan tag drop eligible indicator bit
Parameters:

action enabled/disabled
Command: >set svlan ingress-filter
Privilege: Admin
Syntax : set svlan frame-type action interface[sub-interface]
Explanation: Enable/disable ingress filtering for one port.

action enabled/disabled

interface Interface Name. (lan1/wan1)
Parameters:

[ sub-interface] Interface Name. (pvc1-pvc10)
Command: >set svlan mgmt
Privilege: Admin
Syntax : set svlan mgmt vid
Explanation: Set management SVLAN ID for the bridge
Parameters:

vid SVLAN ID. Range from 1-4094
Command: >set svlan pcp
Privilege: Admin
Syntax: set svlan pcp value
Explanation: Set the svlan tag priority code point
Parameters:  value 0-7
Command: >set svlan port-type
Privilege:
Admin
Syntax : set svlan frame-type type interface[sub-interface]
Explanation: Set the acceptable frame type of one port
 type provider/customer
 interface Interface Name. (lan1/wan1)
Parameters:
 [ sub-interface] Interface Name. (pvc1-pvc10)
Command: >set svlan pvid
Privilege:
Admin
Syntax : set svlan frame-type vid interface[sub-interface]
Explanation: Set Interface PVID
 vid SVLAN ID. Range from 1-4094
 interface Interface Name. (lan1/wan1)
Parameters:
 [ sub-interface] Interface Name. (pvc1-pvc10)
Command: >set svlan regencrc
Privilege:
Admin
Syntax : set svlan mgmt action
Explanation: Enable/disable regenerating CRC on WAN interface for VLAN frames. Show warning msg
Parameters:  action enabled/disabled
Command: >set svlan remove
Privilege:
Admin
Syntax : set svlan remove vid interface [sub-interface]
Explanation:
Remove a port from one SVLAN.