Loop Telecom IP6610, User Manual

Page: 58 / 190

Chapter 7 Frame Relay Setup
35
7.2 Frame Relay Setup Commands
To set up the Frame Relay application you will use the commands in Table 7-1, below. Step by step
instructions follow the table.
Table 7-1 Frame Relay Setup Commands
Frame Relay Setup Commands
Command Parameters Description Brg Rt Privilege
protocol protocol-
type
hdlc/
ppp/
chdlc/
frame_relay [protocol]
ansi/q93
3 [n391
value]
1-255 [n392
value]
1-10 [n393
value]
1-10 [t391
value]5-
30 set WAN1 layer 2
protocol V V Admin
pvc dlci pvc#1~10 DLCI
0/16~991 [CIR] [Bc] [Be] [burst] Create/set/delete
WAN1 PVC
parameters.
When DLCI is 0,
the PVC will be
deleted.
V V Admin
pvc ip pvc#1~10 ip_addr
xxx.xxx.xxx.xxx net_mask
xxx.xxx.xxx.xxx Set a PVC’s IP
address -- V Admin
set wan1
pvc routing pvc# routing_protocol rip1/rip2/static Set a PVC’s layer3
routing protocol -- V Admin