Chapter 15 STP/RSTP Setup
70
Set up the WAN port priority. Key in the command
set spantree port_prior
followed by the Port type ( we
chose
wan1
), followed by the priority value (we chose
127
). Press Enter. A sample screen is shown below.
Set up the span tree age period. Key in the command
set spantree age
followed by a time value in
seconds ( we chose
6
). Press Enter. A sample screen is shown below.
Set up the span tree delay period. Key in the command
set spantree delay
followed by a time value in
seconds ( we chose
20
). Press Enter. A sample screen is shown below.
Set up the span tree hello period. Key in the command
set spantree hello
followed by a time value in
seconds ( we chose
4
). Press Enter. A sample screen is shown below.
Set up the LAN port cost. Key in the command
set spantree cost
followed by the Port type ( we chose
Lan1
), followed by the cost value (we chose
100
). Press Enter. A sample screen is shown below.
Set up the WAN port cost. Key in the command
set spantree cost
followed by the Port type ( we chose
wan1
), followed by the cost value (we chose
100
). Press Enter. A sample screen is shown below.
Summary of Contents for IP6610
Page 2: ...2011 Loop Telecommunication International Inc All rights reserved Version 33 23 MAR 2011...
Page 76: ...Chapter 11 Port Forwarding Virtual Service 53...
Page 79: ...Chapter 12 QoS 56 Figure 12 1 QoS Application...
Page 119: ...Chapter 20 Setting Up Firmware Configuration Up Download with TFTP Server 96...
