49
PTZ TYPES
The DVR System supports many PTZ devices, the user may select the type of PTZ.
Then the user chooses the speed of each connected PTZ under the Baud Rate column. Occasionally,
the PTZ camera ID number may differ from the number shown on the screen; should this occur, please
set the camera number to be the same as the PTZ ID to enable the user to control the PTZ camera.
Note: For specific details of device setup information, please refer to the PTZ product documentation.
Note: If the PTZ device Baud rate setting does not match the corresponding Baud rate setting of the
DVR, then the device will most likely not function correctly.
Figure 12-3: PTZ Type
PTZ Device Control
This function allows setup of the PTZ Device speed, direction, and zoom ratio.
1.
To maneuver the PTZ camera at different speeds click the drop-down list next to “
Speed
”. Users can set
the speed range from 0~7.
2.
Using the Dome controls at the bottom left of the “
PTZ
” window, users can configure their PTZ cameras
to move
left
,
right
,
up
, and
down
.
3.
If your DVR system is set up to use a PTZ camera, you can zoom the camera in or out by clicking
to
zoom in
, and
to
zoom out
.
Figure 12-4: Dome Settings, Focus, Iris
If you are not familiar with the DVR system or do not know how to properly control a PTZ camera,
please try to follow the steps introduced above, while observing the resultant changes to the screen
output. Once you understand how to control the PTZ device, then you could start to learn the following
additional PTZ device functionality.
Focus
When connecting a PTZ camera to your Digital Video Recorder, you have the option to focus in on the
picture. Use
to
focus-in
,
to
focus-out
, and
to have the camera automatically
adjusted.
Dome Settings
Focus
Iris
