Linhai M565Li T3 EFI, Service Manual, Page: 167 / 338

96
CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3-
Drive Bevel Gear
●
Install Drive Bevel (2) and tighten 4
bolts (1)
Erection Bolt torque (M8X 28):40N
.
m
Balance Shaft, Crankshaft, Connection
rod
Install balance shaft
●
Turn the balance shaft into proper
position (as picture indication),install into
crankshaft
●
Keep a strip of straight line for marks on
crankshaft, oil bore of balance shaft neck
Running the crankshaft and balance shaft
to inspect whether match for balance
shaft bore and gap of crankshaft. If not,
reinstall
Crankcase (right)
●
Wipe Sealant on the crankcase(left)
junction surface
1. Balance shaft bore 2.Crankshaft gap
●
Install three locating pin and “O” ring seal
as picture indicated
Note: Sealant should be uniformity and
continuous threadiness