Linhai M565Li T3 EFI, Service Manual

Page: 273 / 338

CHAPTER 5 FINAL DRIVE
M565Li SERVICE MANUAL 2019.0
CHAPTER 5 FINAL DRIVE. 5- 19
Fig 1
2. Mount the adjust shim D in the shaft neck of
the bevel gear comp.-driven E.
Mount the bevel gear comp.-driven E in the
bore of bearing A.
Mount the adjust shim F in the other neck of
the bevel gear comp.-driven E.
→Fig
2
Fig 2
3. Mount the needle bearing H and the
needle bearing
Ⅰ
into the suited hole of
the rear gear case G.
→Fig
3
Fig 3
4. Apply some Loctite 510 silicone sealant on
the
screw thread . Mount the drain plug
M14×1.25×12 L with the washer M, tight
securely (35~40N.m) .
→Fig
4