Linhai M565Li T3 EFI, Service Manual

Page: 40 / 338

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 1 3
·
When it is necessary to run the engine indoors, make sure that exhaust gas is
forced out doors.
·
When working with toxic or flammable materials, make sure that the area you
work in is well ventilated and that you follow all of the manufacturer's instruction.
·
Never use gasoline as a cleaning solvent.
·
To avoid getting burned, do not touch the engine, engine oil, radiator, and
exhaust system until they have cooled.
·
After servicing the fuel, oil, engine coolant, exhaust or brake system, check all of
the lines, and fittings related to the system for leaks.
·
In order to protect the environment
,
do not unlawfully dispose of motor oil,
engine coolant or parts no longer used.
Warning
：
·
If parts replacement is necessary, replace the parts with LINHAI
genuine parts or their equivalent.
·
When removing parts that are to be reused, keep them arranged in an
orderly manner so that they may be reinstalled in proper order.
·
Be sure to use special tools when instructed.
·
Make sure that all parts used in reassembly are clean. Lubricate them
when specified.
·
Use the specified lubricate, bonds, or sealants.
·
When tightening bolts, screws and nuts, tighten the larger sizes first.
Always tighten the nuts and bolts from the inside working out,
diagonally and to the specified torque.
·
Use a torque wrench to tighten fasteners to the specified torque. Wipe off
grease and oil if a thread is smeared with them.
·
After removing the parts, need to double check them, cleaning all the
parts before measure